Posted   by 

Lynks Plus Series Owners Manual Download

Lynx Plus Series Control
Quick Installation Guide
This Quick Installation Guide can help you install the rechargeable Lynx Plus Series Control quickly and easily by providing the basic steps for installation using the built-in defaults and the Voice Prompt Programming mode. The Voice Prompt Programming mode allows you to quickly program the system by responding to a series of voice prompts. FOR DOCUMENTATION AND ONLINE SUPPORT: http://www.security.honeywell.com/hsc/resources/MyWebTech (see Lynx Plus Series Installation and Setup Guide P/N 80003857V1 or higher.) A copy of the Installation and setup Guide may also be requested from Honeywell.

WARRANTY INFORMATION
For the latest warranty information, please go to:
www.honeywell.com/security/hsc/resources/wa

1. Install the Control
AUDIO CABLE BACK CASE 7720P PROGRAMMING JACK TIE WRAP MOUNT WIRE ROUTING TUNNELS

Performance Moels Sinature Owners Manual 99301468-11 INSTALLATION STEP 9 Install mattress retainer at the foot end of the adjustable base as follows: a. Locate grommeted holes at foot end of base. Place mattress retainer ends into grommeted holes in top surface of adjustable base (FIGURE 6). Press down until horizontal retainer. Honeywell Lynx Plus Series Manuals Refer to the Lynx Plus Series Installation and Setup Guide P/N 800-03858 or later for detailed information on programming the system. The Installation and Setup Guide contains full descriptions for all data fields. UL Lynx Plus is not intended for UL985 Household Fire applications unless a Page 1/3.

Lithovue system workstation user's manual template. GMDN Preferred Term NameGMDN DefinitionFlexible video ureteroscope, reusableAn endoscope with a flexible inserted portion intended for the visual examination and treatment of the ureter (the upper urinary tract that connects the kidney to the bladder). Anatomical images are transmitted to the user by a video system with a charge-coupled device (CCD) chip at the distal end of the endoscope and the images showing on a monitor. It is inserted through the external urethral orifice and bladder during ureteroscopy.

2. Make Wiring Connections
WARNING TO PREVENT RISK OF SHOCK, DISCONNECT TELEPHONE LINE AT TELECOM JACK BEFORE SERVICING THIS UNIT
INCOMING TELEPHONE LINE

3. Make Battery Connections
SCREW
NOTE WALYNXRCHKIT-SHA BATTERY PACK SHOWN
NOTE USE ONLY THE K10145WH/K10145X10 OR K10145CN TRANSFORMER PROVIDED

4. Program the Control
Change the Installer Code
The factory default Installer Code for the Lynx Plus Series Control is set to 4-1-1-2. To change this code, you must enter Expert Programming mode. 1. After Power-up, enter Installer Code + 8 0 0 or press both the [7] and [#] simultaneously within 50 seconds after power is applied to the control. The system will enter the Expert Programming Mode and “20 INSTALLER CODE” will be displayed.
Note: Upon power-up or after exiting program mode, the system takes up to a minute to reset. To bypass the reset delay, enter [#]+[0].

UL NOTE THE MINIMUM WIRE SIZE USED FOR TELEPHONE INSTALLATIONS MUST BE #26 GAGE
ALL OUTPUT CIRCUITS ARE POWER LIMITED. HARD WIRED ZONE 6-14VDC 120mA max. PREMISES TELEPHONE 2k OHMS EOLR BELL

RETAINER BATTERY PACK

TIE-WRAP POINT

EARTH GROUND

AC
MOUNTING HOOKS ROTATE FRONT CASE UPWARD TO RELEASE HOOKS

AC
NOTE ENSURE ALL WIRING IS ROUTED THROUGH WIRE STRAIN RELIEF CLIP BATTERY CABLE PLCD CONNECTOR TIE WRAP BATTERY CONNECTIONS ECP/POWER CABLE
TIP RING TIP RING

8 POS JACK
1

T

R

Lynx plus series owner

T

R

HWZ

SOUND OUT 8 9

AC

AC

2

3

4

5

6

7

10

11

K10145WH/K10145X10 OR K10145CN PLUG-IN TRANSFORMER 9VAC, 25VA

2. Enter 720 3. Enter a new four-digit Installer Code.

INCOMING PHONE LINE EARTH GROUND PHONE ZONE SOUNDERS AC

Program variable data fields
1. If required, enter 724 to program the desired 2-digit RF House ID for wireless keypads. 2. If required, enter 740 to program a PABX Access Code or to Disable Call Waiting (LynxSIA Plus only). 3. Enter 794 to program the downloading computer phone number. 4. Press the ESCAPE/ OFF key to enter Voice Prompt Program mode. The system will announce, “Programming, use arrows to scroll choices, press select to accept, press escape to quit.” The system will announce the available options. 5. Follow the directions provided by each voice prompt to make your selections.
The FUNCTION/ # key can be used to repeat a voice prompt, as required.

1000-100-004-V0

GSMVLP COMMUNICATION PORT GSMVLP AUDIO CABLE CONNECTOR

Note: For the complete Summary of Connections, refer to the Lynx Plus Series Installation and Setup Guide P/N 800-03857V1 or higher
1000-300-028-V0

TELEPHONE CONNECTION

LOCKING TABS

FRONT CASE

1000-300-007-V0

1. Separate the front case from the rear case by rotating the front case and releasing the hooks from the rear case. 2. Feed the wiring through the openings provided in the rear case. 3. Mount the rear case to a sturdy wall and secure with the provided screws. 3. Reconnect the front case and rear case.

1. Make earth ground connections to terminal 1. 2. Connect the incoming phone line to either the 8-position jack or terminals 2 (TIP) and 3 (RING). 3. Connect the handset phone lines to terminals 4 (TIP) and 5 (RING).
Note: For full line seize operation, refer to the Lynx Plus Series Installation and Setup Guide.

4. If used, connect a bell to terminals 8 (-) and 9 (+). 5. Connect the sensors/contacts to the hardwired zone terminals 6 (-) and 7 (+). 6. If used, install the GSMVLP communications device in accordance with Installation Guide to the GSMVLP communications port. 7. If used, connect the GSMVLP ECP/Power Cable and the GSMVLP Communications Cable between the communications device and the appropriate connectors on the control. 8. Connect wires from the K10145WH/K10145 OR K10145CN Transformer to terminals 10 and 11.
Note: If using Powerline Carrier Devices refer to the Lynx Plus Series Installation Guide P/N 800-03857V1 or higher.

1. 2. 3. 4. 5. 6. 7.

Remove screw securing the battery retainer. Remove the battery retainer. Insert battery pack into back plate. Install battery retainer. Install screw to secure the battery retainer. Connect battery connector to receptacle on PC board. After all wiring connections have been made, snap the front assembly to the back plate so it is held by the locking tabs. 8. Plug the transformer into a 24-hour, 110VAC unswitched outlet.
Note: Rechargeable batteries may take up to 48-hours to fully charge. “LOW BAT” message should clear within four hours, or by entering Test Mode.
Battery Standby Time (Minimum) 4-hours 24-hours 24-hours

6. When you have completed each programming procedure the system will return to the Main Programming Menu.
Note: If you are installing a GSMVLP in conjunction with the control refer to the Programming Notes shown below.

Viewing data fields
1. To view data entered in field, press [#] plus the field that you wish to view (e.g., #21). The system will beep three times and data programmed for that field will be displayed to the right of the field number. The system will scroll through the data for longer numbers and a beep will sound after each number is displayed or three times after the final digit is displayed.

Battery Part Number LYNXRCHKIT-SC LYNXRCHKIT-HC LYNXRCHKIT-SHA

Low Battery Notification Approx. 1-hour before battery depletion At least 1-hour before battery depletion At least 1-hour before battery depletion

Programming Notes
When programming the Control to communicate with a GSMVLP Communications Device, Fields 55, 77 and 91 must be programmed as follows (refer to the Lynx Plus Series Installation and Setup Guide (P/N 800-03857V1 or higher) or Programming Guide (P/N 800-03859 or higher): Radio reporting only: Radio reporting with two-way voice via GSMVP: Field Selection Field Selection 55 3 55 5 77 1, 2 77 2, 2 91 0 or 2* 91 4 * 2 is default, but remote phone control will not work if GSM reporting only is selected. Once programming of the module is complete, enter Installer Code + OFF at the control to send the registration for the GSMVLP to AlarmNet.

(Continued on reverse side)


800-03860V2 8/10 Rev. A

2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747
Copyright © 2010 Honeywell International Inc. www.honeywell.com/security

Plus

Programming Notes
Entering Voice Prompt Programming
Power-up the control and enter the Installer Code + 8 8 8. When you have completed each programming procedure the system will return to the Main Programming Menu.

5. Voice Prompt Programming
Navigating the Voice Prompt Programming Mode
Scroll through the voice menu and follow the instructions provided to continue using the Voice Prompt Programming Mode. The following keys are used to navigate through this feature.
1. ESCAPE/ OFF key: Used at any time to exit the current menu and return to the previous prompt. 2. ADD/ AWAY key: Used to add sensors or keys or save data when entering phone or account numbers. 3. DELETE/ STAY key: Used to delete a sensor when in the delete Sensors Menu. 4. SELECT/ AUX key: Used to confirm a selection. 5. 6. 3↑ 6↓ key: Used to scroll forward through menu choices. key: Used to scroll backward through menu choices. key: Used to repeat a voice prompt.

6a. Add Sensors
The Lynx Plus Series will enroll a sensor once the transmitter has been activated two times. The system will confirm the enrollment following each subsequent activation of the same transmitter.

Add a Door Sensor

Kenwood excelon kdc x493 user manual. You may select a Speaker Setting of 'SP Off'(flat), 'SP OEM' (for OEM factory speaker systems), 'SP 6x9/6' (for systems with6' and 6'x9' speakers), or 'SP 5/4' (for systems with 4' and 5' speakers).System Q Sound Control: Seven EQ curves are preset intomemory, allowing you to recall the best preset EQ curve for different types ofmusic.

Exiting Voice Prompt Programming
Once you have returned to the Main Programming Menu, press the ESCAPE/ OFF key.


(1) Delay Door Location Front Back Side Sliding Hall Kitchen Garage Patio Basement

Entering Central Station Phone Numbers
Enter 0-9, #+11 = 7, #+12 =#, #+13 = a pause of 2 seconds.

Entering Central Station Account Numbers
Enter 0-9, #+11=B, #+12 =C, #+13=D, #+14=E, #+15=F

Add a Window, Motion Detector, or Fire Detection Sensor

Programming Zone Types
The Voice Prompt Programming feature can not be used to program Zone Types 02, 05, 10, 14, and 24. Programming these zone types must be done using the Expert Programming Mode.

7. FUNCTION/ #

(This function cannot be used while entering phone or account numbers.)
5

1
ARMED READY

3
OFF
ESCAPE

1
RECORD

2
VOLUME

3
PLAY

STAY
DELETE

AWAY
ADD

4
LIGHTS ON

5
TEST

6
BYPASS

AUX
SELECT


4 6 7
1000-300-012-V0

2

7
LIGHTS OFF

8
CODE

9
CHIME

0
STATUS NO DELAY FUNCTION

(2) Sensor Type Window Motion Detector Fire Detection

(3) Sensor Location Living room Kitchen Dining room Hall Bedroom Basement Bathroom Master Bedroom Nursery Den

Family Room Guest Room Laundry Room Utility Room Garage

Attic Office Upstairs

(4) Location Modifiers Upstairs Downstairs First Second Third

Second Floor Front Rear Side

Lynx Plus Series Owner's Manual Download Free

6a. Add Sensors (Continued)
Add an Emergency Pendant

7. Add Central Station Accounts
Add First Central Station Phone Number

8. Program Additional Options
Enter Expert Programming Mode
Once you have entered the Expert Programming Mode, the [ESCAPE] key can be used to return to the Voice Prompt Programming mode. If you are in any of the Interactive Menu Modes (756, 780, 781, 783, 784 or 785), you must return to the main menu in that field before pressing the [ESCAPE] key.

10. Program User Functions
Set the Real-Time Clock
1. Enter the Installer Code + FUNCTION/ #
+ 63 2. Follow the Voice Prompts to program the Clock/Calendar.

Change the Master User Code
1. Enter the Installer Code + CODE/ 8
Code. + 02 + desired 4-digit Master

(5) Pendant Type Medical Fire


Silent Police Police

Add First Central Station Account Number

Add a Wireless Key
When adding wireless keys, wait 5 seconds between transmissions.

All four digits of the Central Station Account numbers must be entered. For ten-digit format, all ten digits must be entered. Refer to the Lynx Plus Series Installation and Setup Guide for additional information regarding these programming options.

The Lynx Plus Series is configured with Factory Default Settings. You can revise these settings using the Expert Programming Mode. Refer to the Installation and Setup Guide to view these defaults and to continue programming the individual fields using this mode.

Add User Codes
1. By following the procedures in the Lynx Plus Series User Guide, show the User how to add additional User Codes.

11. Test the system

Add Second Central Station Phone Number Exit Expert Programming Mode
When programming is complete, enter 799. 1. Enter the User Code+ TEST keyThe external sounder will sound for two seconds and all the LCD segments on the keypad display light for 3 seconds. 2. Open each protected door and listen for three beeps from the keypad, followed by the zone’s Voice Descriptor. Identification of each faulted protection point should appear on the display, and clear when the door is closed. 3. Walk in front of the motion sensor and listen for three beeps and the zone’s voice descriptor. 4. When testing is complete, enter: User Code + OFF key. 5. Press each key on the key fob to confirm it performs its assigned function.
Note: Refer to the Lynx Plus Series User Guide for additional information.

9. Perform Go/No Go Test 6b. Delete Sensors
Delete Sensors Add Second Central Station Account Number
Temporarily mount wireless devices in the preferred mounting location and perform a Go/No Go test to ensure adequate signal strength is available. 1. Enter Installer Code + [#] + [8] and run Go/No Go Test. 2. Fault each transmitter to ensure all programmed zones are received. 3. Mount the transmitter in its permanent location.

[1943a9] Lynx Plus Series Security System User Guide

Honeywell Lynx Plus Manual Espanol. The Honeywell L3000PK is a cellular wireless security system kit that includes; LYNX Plus control panel w/battery and transformer (L3000), cellular alarm communicator, Honeywell L3000 Manuals; This is the programming guide for the Honeywell LYNX Plus. If you need help programming your Honeywell L3000,.

Lynx Plus Series Owner's Manual Download 2017

Honeywell Lynx Plus Security System Manual

Honeywell LYNX Plus Series User Guide Alarm Grid. Here you can view all the pages of manual Honeywell control panel LYNX Plus User Manual. The Honeywell manuals for Control panel are available online for free. You, [d2322d] - Honeywell Lynx Touch User Manual view and download honeywell lynx plus quick manual to user functions online ynx plus security system lynx plus security.

Lynx Plus Series Owner's Manual Download For Windows 7

[1943a9] - Lynx Plus Series Security System User Guide view and download honeywell lynx plus quick manual to user functions online ynx plus security system lynx plus online honeywell lynx plus series security systems lynx plus series security literature user manuals control panels lynx touch user manual lynx plus user manual vista

2012-07-15 · Electronic Home Security Systems, Alarms and Devices - Reset Honeywell Lynx system to brand-new state.. - I just bought a house that has a Honeywell Lynx system Honeywell Lynx L3000 Installation Manual Read/Download of the Lynx Plus · Honeywell Lynx Plus User Manual. This is the latest Lynx keypad that is not a

view and download honeywell lynx plus quick manual to user. Honeywell L3000LB LYNX Plus Wireless Self-Contained Security Control. 7845GSMR Ademco Honeywell’s Digital Cellular Communicator. by Ademco Honeywell. $29.99, 2011-05-26 · How to Operate Your System The new LYNX Touch's vivid touchscreen makes the system so simple to use. Honeywell LYNX Plus ….

Honeywell Lynx Plus Security System User Guide

Lynx Plus Series Owner's Manual Download Online

Top 20 Honeywell Ademco LYNX Plus LYNX Plus. Changing your code is easy. this may not work on all Honeywell keypads, this is for the Lynx Plus Wireless User Manual p9 BATTERY FOR ADEMCO LYNX & ADT, lynx plus user manual vista 10p security system user manual vista 10se via 30pse security systems user manual buy honeywell l3000 lynx plus control.

Honeywell LYNX Plus Series User Guide Alarm Grid. You can view and download your ADT User Manuals here. We have them for old and new panels and also wireless and wired alarm systems. Honeywell Lynx Plus …, online honeywell lynx plus series security systems lynx plus series security literature user manuals control panels lynx touch user manual lynx plus user manual vista.

Honeywell Lynx Plus Series Security System User Guide

Lynx Plus Series Owner's Manual Download Pdf

Lynx Plus Series User Manual WordPress.com. Honeywell Lynx L3000 Installation Manual Read/Download of the Lynx Plus · Honeywell Lynx Plus User Manual. This is the latest Lynx keypad that is not a System Manuals & User Guides. Ademco Lynx (279kb) Ademco Vista 10 (2.0mb) Ademco 10SE (196kb) Medical Alert Plus - User Manual.

Lynx Plus Series Owner's Manual Download For Pc


User's Manual

lynx plus user manual vista 10p security system user manual vista 10se via 30pse security systems user manual buy honeywell l3000 lynx plus control Ademco Vista 100 User Manual Ademco Honeywell User Manual Ademco 4110XM User Manual · Ademco 5110XM User Manual · Lynx Plus User Touch L5200 User Manual